www.pavo.ch 38 Chain Rider Type CKS + CKD ✓ universal machine component ✓ maintenance-free, no lubrication necessary ✓ temperature range -40°C until 120°C ✓ chain operation-speed < 1.5m/s ✓ frictional heat < 240°C ✓ surface resistance 10-13 Ohm • in explosion-proof rooms, we recommend that the components be grounded Chain Drives • install the tensioner device in the slack-side • the chain rider should be mounted as close to the pinion as possible • after tensioning, fine-adjust the position of the chain rider on the screw and fix it with the adjusting nuts • when reversing run, one each tensioner device should be used on both sides. In the tension side of the drive the tension angle on the tensioner device should not be greater than 25 ° Dimensions Type Art. No. A L B ø C E R weight material Declaration Type of roller chain DIN 8187 ANSI mm [kg] ISO-06B-1 35 CKS 3/8"-8 250 038 008 10 64 23.4 8 - 50 0.007 PE-UHMW black ISO-08B-1 40 CKS 1/2"-10 250 012 010 15 77 28.1 10 60 0.015 ISO-10B-1 50 CKS 5/8"-10 250 058 010 20 102 37.4 10 80 0.040 ISO-12B-1 60 CKS 3/4"-12 250 034 012 20 128 46.7 12 100 0.066 ISO-06B-2 35 CKD 3/8"-8 251 038 008 20 64 23.4 8 10.24 50 0.015 ISO-08B-2 40 CKD 1/2"-10 251 012 010 30 77 28.1 10 13.9 60 0.030 ISO-10B-2 50 CKD 5/8"-10 251 058 010 40 102 37.4 10 16.9 80 0.080 ISO-12B-2 60 CKD 3/4"-12 251 034 012 40 128 46.7 12 19.5 100 0.132
RkJQdWJsaXNoZXIy NjQ1